Fully refined paraffin products have good chemical stability and moderate oil content

Fully refined paraffin is a granular white solid. The relative density increases with the melting point. The product has good chemical stability, moderate oil content, good moisture-proof and insulation function, good plasticity. Semi-refined white wax candle flame gathering, smokeless, no tears. Used for candles, crayons, wax paper, general telecommunications equipment and short circuit, light industry, chemical materials. Miscibility is good. Refined beeswax is soluble in all other natural wax oils. Natural white and yellow refined beeswax produced in ideal dissolving, filtering, forming and packing conditions. Low acid beeswax has strong adhesion and is an ideal product for cosmetics such as hair remover. Because PARTICLE wax excellent characteristics also have a very wide range of uses, because particle wax adhesion, permeability, emulsification, smoothness is very good, widely used in face cream, snow cream, lipstick, hair oil, eyebrow pencil, eye shadow production. It is widely used as ointment base material and encapsulation of Chinese patent medicine in pharmaceutical industry.

Total refined granular wax is a mixture of hydrocarbons, so it does not have the severe melting point of pure compounds. The so-called melting point of white wax refers to the temperature at which the cooled melted white wax sample appears on the cooling curve under regular conditions. All kinds of wax products are required to have a good temperature resistance function of white wax, that is, at a specific temperature does not melt or soften deformation. According to the conditions of use, the use of the region and season and the use of environmental differences, the requirements of the product white wax has a series of different melting points. The main factor affecting the melting point of white wax is the weight of the selected material fraction. The melting point of white wax removed from the heavier fraction is higher.

In addition, the oil content also has a great influence on the melting point of white wax, the more oil in white wax, the lower its melting point. Oil content refers to the amount of low melting point hydrocarbons contained in white wax. High oil content will affect the color and storage stability of white wax, but also reduce its hardness. Therefore, the oil containing wax extract from the reduced pressure fraction needs to be deoiled by sweating method or solvent method to reduce its oil content. But most white wax products need to contain a small amount of oil, which is beneficial to improve the luster and demoulding function of products.

(The above content is all from the Internet, if you have any questions, please contact me to delete)